Aerospace PCB Calculator
Avionics | Space Systems | Defense | UAV
Calculate trace parameters for aerospace and defense electronics. From DO-254 avionics to space-grade designs, ensure your PCB meets stringent reliability and performance requirements.
Aerospace Application Categories
| Application | Standards | Quality Level | Key Requirements |
|---|---|---|---|
| Commercial Avionics | DO-178C / DO-254 | DAL A-E | High reliability |
| Space (LEO) | ECSS / MIL-PRF-31032 | Class 3/A | Radiation tolerant |
| Deep Space | NASA/ESA specs | Class 3/A | Rad-hard, extreme temp |
| Defense | MIL-PRF-31032 | Class 3 | Ruggedized |
Aerospace PCB Requirements
Extreme Environment
Wide temperature range (-55°C to +125°C), altitude derating, vibration resistance. Use polyimide or high-Tg materials. Consider thermal cycling effects.
High Reliability
MIL-PRF-31032 Class 3/A. Extensive testing, screening, and qualification. Redundancy for critical systems. Conformal coating mandatory.
Certification
DO-254 for airborne electronics hardware. AS9100 quality management. ITAR compliance for defense applications. Full traceability required.
Aerospace PCB Materials
Common Aerospace Laminates
Material Requirements
• Tg > 170°C minimum for most applications
• Low CTE for thermal cycling reliability
• CAF (Conductive Anodic Filament) resistant
• Low outgassing for space (ASTM E595)
• QPL listed for MIL applications
Key Design Considerations
Trace Design
- • Conservative current derating (50-75% of max)
- • Wider traces for reliability margin
- • Teardrops at pad connections
- • Avoid sharp corners (45° or curved)
- • Controlled impedance per IPC-2141
Via Design
- • Filled and capped vias for reliability
- • Via-in-pad with proper fill
- • Thermal via arrays for heat dissipation
- • Avoid micro-vias in Class 3/A
- • Conservative current capacity calculations
High-Speed Signals
- • SpaceWire: 100Ω differential
- • MIL-STD-1553: 70-85Ω differential
- • Space-rated transceivers
- • Radiation-tolerant design patterns
- • Redundancy for critical paths
Quality & Testing
- • IPC-6012 Class 3/A fabrication
- • 100% electrical testing
- • Thermal cycling qualification
- • X-ray inspection of vias
- • Ionic contamination testing
Calculate Aerospace Trace Dimensions
Use our free calculators for aerospace PCB design. Ensure proper current derating, impedance control, and reliability margins for mission-critical applications.
Aerospace PCB FAQ
What fabrication class for space?
IPC-6012 Class 3 minimum, Class 3/A (space addendum) for critical missions. This specifies tighter tolerances, testing, and documentation requirements.
How do I handle radiation effects?
Use radiation-tolerant components, implement SEU mitigation (TMR, EDAC), consider shielding, and use proven radiation-tolerant design patterns.
What about outgassing requirements?
Space PCBs must meet ASTM E595 outgassing requirements. TML <1.0% and CVCM <0.1%. Choose materials from NASA outgassing database.
How much current derating for aerospace?
Typically 50-75% of IPC-2221 calculated values. More conservative for flight-critical systems. Always verify with thermal analysis.
Related Tools & Resources
Trace Width Calculator
CalculatorCalculate PCB trace width for your current requirements
Via Current Calculator
CalculatorCalculate via current capacity and thermal performance
Impedance Calculator
CalculatorCalculate microstrip and stripline impedance
Rogers Impedance Calculator
MaterialHigh-frequency RF calculations for Rogers materials
Flex PCB Calculator
MaterialCalculations for flexible polyimide circuits
Automotive PCB Calculator
IndustryADAS, EV, and automotive electronics design